Luminex 100 analyzer overview, Electronic – Luminex 100 User Manual Version 1.7 User Manual

Page 29

Advertising
background image

x

MAP Technology

System Overview

PN 89-00002-00-063 Rev. A

3 - 5

Luminex 100

Analyzer Overview

The Luminex 100 analyzer consists of three subsystems: electronic,
fluidic and optical. The following section describes the user-
accessible components of each subsystem. Chapter 7, "Maintenance
and Cleaning", describes routine maintenance for each of these
components.

Electronic

Power input module: Houses the analyzer on/off switch and
fuses.

P1 communications port (DB9): Connects the Luminex 100
analyzer to the computer.

Analyzer ventilation filter: Provides filtration for the analyzer
ventilation system. To ensure proper ventilation, do not obstruct the
area below the analyzer. Allow at least two inches of clearance
around the analyzer.

Figure 3-1. Rear View of Luminex 100 Analyzer

Communications
Ports (DB9)

Analyzer
Ventilation Filter

XYP Instrument
Ventilation Filter

Power Input Module

Power Switch

Air Intake Access Door

XYP to PC
Serial cable

Advertising