IAI America E-Con - Manual (Page 40)

32
3. X-SEL-J/K/P/Q/JX/KX/PX/QX
X-SEL P/Q type Controller I/O Parameter
No. Parameter name
Default
(reference)
Input
range
Setting Remarks
1 I/O port assignment type 0 0-20 0 0: Fixed assignment
1: Automatic assignment (Priority: Network I/F
module o slot 1 (Standard I/O) -,
* The ports only in the continuous
installation range from slot 1 are assigned
for safety.)
2 Standard I/O fixed assignment time:
Input port start No. (I/O 1)
-1 -1-599 0 0 + (multiples of 8) (Invalid for negative values)
3 Standard I/O fixed assignment time:
Output port start No. (I/O 1)
-1 -1-599 300 300 + (multiples of 8)
(Invalid for negative values)
4 Expansion I/O 1 fixed assignment
time: Input port start No. (I/O 2)
-1 -1-599 -1 0 + (multiples of 8) (Invalid for negative values)
(Slot next to the standard I/O)
5 Expansion I/O 1 fixed assignment
time: Output port start No. (I/O 2)
-1 -1-599 -1 300 + (multiples of 8)
(Invalid for negative values)
6 Expansion I/O 2 fixed assignment
time: Input port start No. (I/O 3)
-1 -1-599 -1 0 + (multiples of 8) (Invalid for negative values)
7 Expansion I/O 2 fixed assignment
time: Output port start No. (I/O 3)
-1 -1-599 -1 300 + (multiples of 8)
(Invalid for negative values)
8 Expansion I/O 3 fixed assignment
time: Input port start No. (I/O 4)
-1 -1-599 -1 0 + (multiples of 8) (Invalid for negative values)
9 Expansion I/O 3 fixed assignment
time: Output port start No. (I/O 4)
-1 -1-599 -1 300 + (multiples of 8)
(Invalid for negative values)
10 Standard I/O error monitoring
(I/O 1)
0 0-5 1
11 Expansion I/O 1 error monitoring
(I/O 2)
0 0-5 0
12 Expansion I/O 2 error monitoring
(I/O 3)
0 0-5 0
13 Expansion I/O 3 error monitoring
(I/O 4)
0 0-5 0
0: Non-monitoring
1: Monitoring
2: Monitoring (Non-monitoring of 24V I/O power
related errors)
(Main application of Ver. 0.55 or later)
3: Monitoring (Monitoring of 24V I/O power
related errors only)
(Main application of Ver. 0.55 or later)
14 Network I/F card remote:
Number of ports used for input
64 0-256 256 Multiples of 16
15 Network I/F card remote:
Number of ports used for output
64 0-256 256 Multiples of 16
16 Network I/F module fixed
assignment time: Number of ports
used for input
0 -1-599 032 0+ (multiple of 8) (Invalid for negative values)
17 Network I/F module fixed
assignment time: Number of ports
used for input
300 -1-599 316 300+ (multiple of 8) (Invalid for negative values)
18 Network I/F module error monitoring 1 0-5 1 0: Non-monitoring
1: Monitoring
* Some exceptions included.
(I/O 1) to (I/O 4) indicate the slot numbers.