IAI America E-Con - Manual (Page 60)

52
3. X-SEL-J/K/P/Q/JX/KX/PX/QX
(3) CC-Link connection with standard I/O ports
a. When only three CC-link boards are used
The following is the setting of a case where standard I/O ports are assigned to the CC-Link boards from the
first port without using a standard I/O board.
(The above is a case where the installation condition as shown in Fig. 3-2-3 in section 3.2.1 is applied.)
Input port No. 032 – 047
Output port No. 332 – 347
Not used
Input port No. 000 – 015
Output port No. 300 – 315
Input port No. 016 – 031
Output port No. 316 – 331