IAI America E-Con - Manual (Page 58)

50
3. X-SEL-J/K/P/Q/JX/KX/PX/QX
3.2.3 Setting of I/O parameters (assignment of I/O ports)
The X-SEL I/O ports used in the CC-Link are set. X-SEL allows a variety of settings of different I/O ports with I/O
parameters. (For further information, refer to the X-SEL Controller Operation Manual.)
The typical setting methods are shown below in this Manual.
Basically, the I/O parameter No. 1 sets the I/O port assignment type to fixed assignment by setting the I/O port
address for each I/O slot.
(1) Board installation positions (slots) and parameter numbers
Parameter No. 6
No. 7
No. 12
Parameter No. 4
No. 5
No. 11
Parameter No. 2
No. 3
No. 10
Parameter No. 8
No. 9
No. 13