IAI America E-Con - Manual (Page 96)

88
5. T
abletop Robot TT
(3) Parameter setting examples of tabletop robot TT
This is the setting in a case where 240 points for each input and output is assigned to the CC-Link board as the
general I/O port.
The I/O port start No. of the TT is fixed.
Input port start No. 48
Output port start No. 348
The number of ports used is set every 16 points. In addition, the port start No. is predetermined, therefore, the
maximum number of ports for each input and output is 240 points.
240 is set to the I/O parameter No. 14 and No. 15.
CC-Link
Parameter No. 14
No. 15
Standard I/O