IAI America E-Con - Manual (Page 65)

57
3. X-SEL-J/K/P/Q/JX/KX/PX/QX
(5) X-SEL I/O port numbers
The standard I/O port numbers of X-SEL are shown below.
The X-SEL port numbers and functional assignment can be changed with I/O parameters. (For further
information, refer to the X-SEL Controller Operation Manual.)
Port
No.
Function
Port
No.
Function
000 Program start 300 Alarm output
001 General input 301 Ready output
002 General input 302 Emergency stop output
003 General input 303 General output
004 General input 304 General output
005 General input 305 General output
006 General input 306 General output
007 Program designation (PRG No. 1) 307 General output
008 Program designation (PRG No. 2) 308 General output
009 Program designation (PRG No. 4) 309 General output
010 Program designation (PRG No. 8) 310 General output
011 Program designation (PRG No. 10) 311 General output
012 Program designation (PRG No. 20) 312 General output
013 Program designation (PRG No. 40) 313 General output
014 General input 314 General output
015 General input 315 General output
Input Output
Note: The number of I/O ports is as follows:
Input 000 to 299 (Max, 300 points)
Output 300 to 599 (Max, 300 points)
When the CC-Link board is used in combination with the expansion I/O board, pay attention to the number
of I/O ports.
} } } }