IAI America CON-PG - Manual (Page 143)

137
6. Operation of SEP
Controllers
No. Operation Screen Remarks
6 Touch [Single].
The single-solenoid operation
mode is selected.
Touch [Menu] to return to the
initial setting menu screen.
7 Touch [Control].
Servo control is selected.
Touch [Menu] to return to the
initial setting menu screen.
8 Touch [Not used].
Non-use of pause command
(*STP) is selected. Touch [Menu] to return to the
initial setting menu screen.
9 Touch [Next].
10 Touch [AUTO].
AUTO home return is selected.
Touch [Menu] to return to the
initial setting menu screen.
11 Touch [LimitSwitch].
LS0 (backward end position
detection) and LS1 (forward end
position detection) are selected
as the output signals.
Touch [Menu] to return to the
initial setting menu screen.
12 Touch [HEND*ALM].
HEND and *ALM are selected as
the OUT2 and OUT3 outputs.
Touch [Menu] to return to the
initial setting menu screen.