IAI America CON-PG - Manual (Page 32)

26
5. Operation of CON Controllers
The main monitor screen appears.
Models other than SCON-CA, PCON-CA, ERC3
Touching [IOMoni] changes the display to one
showing only I/Os.
Touching [DataMon] changes the display to one
showing only the current position, etc.
Touching Axis No. switches to the axis selection
screen.
SCON-CA (CON-PT version 1.20 or later, but before 1.30)
PCON-CA, ERC3 (CON-PT version 1.5 later)
Touching [IO Mon] changes the display to show only
IOs.
Touching [Data Mon] changes the display to show
data such as the current position and control voltage.
Touching [LC Mon] changes the display to show data
such as the current position and force feedback.
Touching [Axis No.] switches the screen to one
where you can select an axis.
Touching [Time] shows the window for time edit adjustment.
Touching [IO Mon] changes the display to show only
IOs.
Touching [Maintenance] changes the display to show
maintenance information.
Touching [Data Mon] changes the display to show
data such as the current position and control voltage.
Touching [Axis No.] switches the screen to one
where you can select an axis.
Touching [Time] shows the window for time edit adjustment.