IAI America CON-PG - Manual (Page 192)

186
7. Operation of MEC Controllers
5) Setting the energy-saving function (auto motor power (auto servo) OFF function)
An example of stoppingat 2 points is explained.
How to automatically turn off the servo in 5.0 seconds after stopping is explained.
No. Operation Screen Remarks
1
Touch on the MEC menu
screen.
2 Set the auto motor power (auto
servo) OFF delay time.
Touch [Parameter].
3 Enter the password. The password is “5119” (factory
setting).
A desired password can be set
using the “system password”
parameter accessible from the
maintenance menu.
4 Touch [Edit Parameter].
5 . Touch [ n]/[p] to navigate through
the screens until the auto servo
OFF delay time setting screen
appears.
6 Touch the value field of auto servo
OFF delay time.
When the numeric keypad is
displayed, touch [5] and then
[ENT].