IAI America CON-PG User Manual
Page 80
74
5. Operation of CON Controllers
5.8.2
Position Movement Operation
Move to a position or continuously to multiple positions registered in the position table.
x [SV ON]:
Touching [SV ON] while the servo is off turns on the axis servo and O becomes
lit. Touching [SV OFF] while the servo is on turns off the axis servo and O
becomes unlit.
x [HOME]:
Touching [HOME] while home return is not yet completed causes the axis to
return home and O becomes lit.
x [n], [p]: Touch
[
n] and [p] to select a desired position number. The target position of the
selected position number appears.
x [Chg Vel]:
The speed override changes to 10%, 50% and 100% every time [Chg Vel]] is
touched.
x [Move]:
Touching [Move] moves the axis to the target position. The current position can
be checked by the display in Current Pos.
x [Continuous]: Touching [Continuous] moves the axis continuously until Stop is touched.
x [Stop]:
Touching [Stop] stops the axis.
x [Menu1]:
Move to the Menu 1 screen.
5.9.2