ZOLL M Series Defibrillator Rev YH - Manual (Page 30)

M S ERIES O PERATOR ’ S G UIDE
2-8
To print an incident log:
1. Press the SUMMARY button.
2. Press the Print Log softkey.
The M Series unit prints incident log.
Erasing Summary Report Memory
To erase all stored information, press and hold the
SUMMARY button for approximately 4 seconds. Then
press the corresponding softkey to erase summary,
erase trend, or erase all event reports. An “ERASING
REPORT” message will appear on the display.
Turning the unit off for more than 15 minutes, unless
configured otherwise, will also erase summary and trend
report memory.
CHARGER ON
SUMMARY
CODE
MARKER