ZOLL M Series Defibrillator Rev YH - Manual (Page 75)

A-1
APPENDIX A
SPECIFICATIONS
General
Size 6.8 in. high X 10.3 in. wide X 8.2 in. deep
17.3 cm high X 26.2 cm wide X 20.8 cm -deep
Weight 11.5 lbs (5.23 kg) with Multi-Function Cable and battery; 13.5 lbs (6.14 kg) with paddles
Power Sealed lead acid battery pack; 5 cells, 2V/cell (wired in series)
AC Power 100-120 ~ 50/60 Hz, 220-240 ~ 50 Hz, 220 VA
DC Input (Optional) 10-29 V. 130 W
Device
Classification Class I and internally powered per IEC 601-1.
Class II and internally powered per IE 601-1. (DC Input ONLY).
Design Standards Meets or exceeds UL 2601, AAMI DF-39, AAMI DF-2, IEC 601-2-4, IEC 601-2-25, and
IEC 601-2-27.
Patient Safety All patient connections are electrically isolated.
Environmental Operating Temperature: 0
C to 55 C.
Note: The M Series device may not perform to specifications when stored at the upper or
lower extreme limits of storage temperature and immediately put into use.
Storage and Shipping Temperature: -20
 to 60C
Humidity: 5 to 95% relative humidity, non-condensing
Vibration: Mil Std 810E, Minimum Integrity Test
Shock: IEC 68-2-27, 50g 6mS half sine
Operating Pressure: 594 to 1060 mBar
Material Ingress: IEC 529, IP24
Electromagnetic Compatibility (EMC): CISPR 11 Class B - Radiated and Conducted Emissions
Electromagnetic Immunity: AAMI DF-2: IEC 1000-4-3 to 20 V/m
Electrostatic Discharge: AAMI DF-2: IEC 1000-4-2
Conducted Susceptibility: IEC 1000-4-4, 1000-4-5, 1000-4-6