ZOLL M Series Defibrillator Rev YH - Manual (Page 9)

1-1
SECTION 1
GENERAL INFORMATION
NOTE: Your M Series may or may not contain all the features listed in this manual,
depending on your particular configuration.
Product Description
The ZOLL
®
M Series
®
products combine a defibrillator, ECG display, advanced monitoring capabilities, and
Noninvasive Transcutaneous Pacing (NTP) with communication, data printing and recording capabilities in a single
lightweight portable instrument. The unit has been designed for all resuscitation situations and its small, compact,
lightweight design makes it ideal for accompanying patients during transport. The product is powered by AC or DC
mains and an easily replaced battery pack that is quickly recharged in the device when it is connected to AC or DC
mains. In addition, the unit’s batteries may be recharged and tested using ZOLL PowerCharger systems designed for
standard interchangeable ZOLL battery packs.
The product is designed for use in both the hospital and the rugged EMS environment. All of its ruggedized features
add to its durability in hospital applications. The device is a versatile automated external defibrillator with or without
manual capabilities and may be configured to operate in manual, advisory or semi-automated modes. Semi-automated
versions of the device have a distinctive front panel with a single “ON” position. Conventional hospital style devices,
which can be configured for manual, advisory or semi-automated operation, have a standardized ZOLL operator
interface. When operating in the manual configuration the device operates as a conventional defibrillator where the
device’s charging and discharging is fully controlled by the operator. In advisory and semi-automatic modes, some
features of the device are automated and a sophisticated detection algorithm is used to identify ventricular fibrillation
and determine the appropriateness of defibrillator shock delivery. Units may be configured to automatically charge,
analyze, recharge, and prompt the operator to “PRESS SHOCK,” depending on local protocols. The unit is switched
from the semi-automated mode to manual mode for ACLS use by pressing the appropriate soft key on the front panel.
The M Series assists caregivers during cardiopulminary resuscitation (CPR) by evaluating the rate and depth of chest
compressions, and providing feedback to the rescuer. Real CPR Help™ requires the use of CPR-D•padz and the
CPRD-to-MFC connector. Real CPR Help is available in the M Series unit with software version 38.90 or higher.
Information regarding the unit’s operation, patient ECG, and other physiological waveforms are displayed on a large
5.66 inch diagonal display which provides high contrast and visibility under virtually all lighting conditions. Operating
and warning messages are displayed on the monitor and the unit can also be configured with voice prompts to alert the
user to unit status. Self-diagnostic tests are performed when the instrument is turned on and the unit is periodically
tested during operation.
A sophisticated data collection system, an optional internal summary report feature with printer, and PCMCIA cards are
available for this unit. A PCMCIA card can be installed in the unit to record ECG and virtually all device data when the
device is turned on. In addition, voice data from any incident around this device can also be recorded. The data stored
on the PCMCIA card can be reviewed and archived on a properly equipped personal computer using ZOLL Data
Control™ software.
An annotating stripchart recorder can be included to provide immediate documentation as well as summary report
functions about patient care and treatment during use.
Some M Series products are intended for use in the semiautomatic mode by first responders and emergency medical
technicians certified by an appropriate federal, state or local government authority. Some M Series products are
intended for use in manual mode by personnel certified by appropriate federal, state or local authority to provide
advanced life support care.