Operational tests, Physical inspection of the unit – ZOLL Propaq M Rev A User Manual
Page 19
Operational Tests
9650-0804-01 Rev. A
ZOLL Propaq M Service Manual
15
Operational Tests
The Propaq M comes equipped with routine operational tests that can be performed
periodically. With the exception of the Physical Inspection of the Unit test, these tests contain
instructions within them provide guidance during the tests.
Physical Inspection of the Unit
Tools Needed
None
Test Setup
None
Observe this...
Pass/Fail
1.
Housing
Is the unit clean and undamaged?
o
o
2.
Does the unit show signs of excessive wear?
o
o
3.
Does the handle work properly?
o
o
4.
Does the recorder drawer open and close properly?
o
o
5.
Are input connectors clean and undamaged?
o
o
6.
Are there any cracks in the housing?
o
o
7.
Do the front panel or selector switches have any damage or cracks?
o
o
8.
Are there any loose housing parts?
o
o
12.
Cables
Are all cables free of cracks, cuts, exposed or broken wires?
o
o
13. Are all bend/strain reliefs undamaged and free of excessive cable wear?
o
o
14.
Battery
Is the Propaq battery fully charged?
o
o
15. Is the battery seated in the battery well correctly?
o
o
16. Is battery housing free of cracks and damage?
o
o
17. Are connectors free of damage and excessive wear?
o
o