ZOLL Propaq M Rev A - Manual (Page 49)

Disassembling the Main Unit
9650-0804-01 Rev. A ZOLL Propaq M Service Manual 45
6 Disconnect the battery communication
cable (yellow, orange, brown, red)
connector from the monitor board.
7 Disconnect the termination board from the
monitor board.
8 Disconnect the two power cable
connectors (battery (black) and AUX
(white)).
9 Use an orange stick to release the tabs on
either side of silver ZIF connector between
the dock connector and the monitor board.
Note: Release one side at a time.
10 Separate the two parts of the unit.
battery
cable
p
two power
cables
NIBP
hoses