ZOLL Propaq M Rev A - Manual (Page 46)

C HAPTER 3 D ISASSEMBLY P ROCEDURES
42 9650-0804-01 Rev. A
• 1/2” nut driver
• Large diagonal cutters
• Strong glue, such as Loctite 420 or equivalent
• Loctite needle tip dispenser
Safety Precautions
• Only properly trained technicians should service the unit.
• Make sure you take the necessary precautions when working with static sensitive units. For
example, you must wear a conductive wrist strap (which touches your skin) connected to a
grounding mat and to the earth ground.
Modules
The Propaq M unit contains the following six (6) modules or assemblies:
• Front Enclosure
• Display
• NIBP
• EtCO
2
(Oridion
®
)
• Monitor Board
• SpO
2
These modules can be purchased as replacement parts from the ZOLL Technical Support
Department. See Chapter 5, "Replacement Parts" for information on ordering replacement
parts.