ZOLL Propaq M Rev A - Manual (Page 57)

Removing the EtCO2 and NIBP Modules
9650-0804-01 Rev. A ZOLL Propaq M Service Manual 53
9 Remove five (5) screws and washers from
the NIBP unit to release it.
Note: During reassembly, torque screws to
6 in-lbs.
10 Cut the tie wrap to the ferrite.
11 Remove multi-wire EtCO
2
cable with
ferrite.
12 Disconnect the brown SpO
2
flex cable as
shown.
13 Disconnect the NIBP tubing from the side
panel in the area illustrated.
tie wrap