ZOLL Propaq M Rev A - Manual (Page 43)

Propaq M Error Messages
9650-0804-01 Rev. A ZOLL Propaq M Service Manual 39
CO2 GAS INPUT
OCCLUSION CO
2
inlet blocked.
Replace FilterLine
®
. If
problem persists, check for
CO
2
inlet occlusion. If still
persists, replace the CO
2
module.
CO2 MAINTENANCE
REMINDER Periodic maintenance
reminder. Replace CO
2
module soon.
CO2 MAINTENANCE
REQUIRED Periodic Maintenance due. Replace CO
2
module.
CO2 NO FILTERLINE No filterline is detected. If FilterLine is connected
and problem persists,
replace FilterLine. If still
persists, replace the CO
2
module.
CO2 CAL FAILURE Calibration failed. Retry calibration or
continue with old
calibration. Replace the
CO
2
module.
Error Message Explanation Technical Action