Yokogawa RotaMASS 3-Series - Manual (Page 114)

APPENdIX 1. LIST OF PArAMETErS FOr EACH BLOCK OF rOTAMASS
a-14 IM 01R04B05-00E-E 3rd edition July 30, 2010 -00 all Rights Reserved. Copyright © 2005, Rota Yokogawa
relative
Index
Index Parameter Name Factory default Write
Mode
Explanation
113 2113 CoRRoSIon_DaMP 10 h o/S Indicates the corrosion damping time.
When the value of CoRRoSIon_aLM_SEL
is “not apply”, users cannot change this
value. Range to 0 to 10 hours.
114 2114 FLuID_MaX_tEMP 0.0 - this parameter indicates the maximum
reached fluid temperature since the last
reset.
user cannot reset this value, only in service.
115 2115 SELF_tESt not Execute o/S a user can execute the SELF_tESt function
by this parameter. after executing the ERR_
StatuS, aLM_StatuS and WaRnG_
StatuS parameter will be updated.
116 2116 InItIaLIZE_EEPRoM not Execute o/S a user can execute the initialization of EEP-
RoM by this parameter.
after a user enters a password, parameters
return to default values.
117 2117 ERR_StatuS - - this parameter indicates the actual error
situation in RCCt3/FB.
118 2118 aLM_StatuS - - this parameter indicates the actual alarm
situation in RCCt3/FB.
119 2119 WaRnG_StatuS - - this parameter indicates the actual warning
situation in RCCt3/FB.
120 2120 HISt_oRD - - this parameter indicates the last 10 errors,
alarms, warning events/status in their order
of occurrences.
the oldest will be removed after an 11th
occur (first in-first out function).
this parameter can be cleared by CLEaR_
HISt Parameter.
121 2121 HISt_aBS_ERR - - this parameter indicates all error events/
status absolute after occurrences.
this parameter can be cleared by CLEaR_
HISt.
122 2122 HISt_aBS_aLM - - this parameter indicates all alarm events/
status absolute after occurrences.
this parameter can be cleared by CLEaR_
HISt parameter.
123 2123 HISt_aBS_WaRnG - - this parameter indicates all warning events/
status absolute after occurrences.
this parameter can be cleared by CLEaR_
HISt parameter.
124 2124 CLEaR_HISt not Execute o/S this parameter clear entries in the HISt_oRD,
HISt_aBS_ERR, HISt_aBS_aLM, and
HISt_aBS_WaRnG parameter.
125 2125 aLaRM_PERFoRM - - this parameter clears alarm/Warning
information about each function block,
temporarily.
If a user writes 0 to a/some with this param-
eter, the corresponding alarm and warning
will be cleared.
126 2126 aLaRM_SuM 0 - the parameter shows current alarm.
127 2127 REFEREnCE_tEMPERatuRE 25°C o/S Indicates the temperature where the
reference density of both components of the
mixture has been determined.
128 2128 REFEREnCE_DEnSItY_CaRRIER 0.997039 kg/l o/S Indicates the density of the carrier liquid de-
termined at the reference temperature.
129 2129 tEMP_CoEFF_a_CaRRIER -0.261 E-3/K o/S Indicates the linear temperature
coefficient of the density of the carrier liquid.
130 2130 tEMP_CoEFF_B_CaRRIER -0.36 E-5/K² o/S Indicates the quadratic temperature coefficient
of the density of the carrier liquid.
131 2131 REFEREnCE_DEnSItY_PRoDuCt 0.0 kg/l o/S Indicates the density of the product
determined at the reference temperature.
132 2132 tEMP_CoEFF_a_PRoDuCt 0.0 E-3/K o/S Indicates the linear temperature
coefficient of the density of the product.
133 2133 tEMP_CoEFF_B_PRoDuCt 0.0 E-5/K 2 o/S Indicates the quadratic temperature coefficient
of the density of the product.