Yokogawa DO402 Dissolved Oxygen Analyzer - Manual (Page 36)

IM 12J05D02-01E
4-4 Operation
4-4. Display functions (default)
YES
YES NO
MODE
NO
YES
YES
NO
NO
YES NO
YES NO
YES NO
DISPLAY
HOLD
AIR.CAL
H2O.CAL
NO
NO
NO
NO
NO
NO
NO
NO
YES
YES NO
YES NO
YES NO
YES NO
YES NO
YES NO
YES NO
YES NO
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
MAN.CAL
YES NO
NO
NO
YES NO
NO
YES NO
NO
YES NO
NO
YES NO
NO
YES NO DISPLAY
(See H 2 O
calibration
Chapter 6)
MEASURE
H2O.CAL
DISPLAY
HOLD
AIR.CAL
When enabled in
Hold (SET HOLD)
mode.
Setpoint adj. also.
when enabled
in service code 51
(See Manual
calibration
Chapter 6)
Process
temperature
Barometric
pressure
Software release
number
Slope
Cell current
Wash start in maintenance mode.
when enabled
in service code 51
Display Access
% Saturation
Current
output 1
Manual temp.
when enabled
in service code 13
Manual press.
when enabled
in service code 51
(Note 1)
(Note 2)
MAN.CAL
(See Air
calibration
Chapter 6)
Note 1: Manual temperature compensation menu
The menu can be displayed in maintenance mode.
This can be done by enabling the function in Service Code 13.
Manual temperature compensation menu is displayed and
temperature can be entered manually.
Note 2: Pressure is in bars.
Default: 1.013 bar
Setting range: 0.500 to 5.000 bar
Current
output 2
Press YES to fix
the selected second
line of display
Zero calibration,
when enabled
in service code 51