Yokogawa DO402 Dissolved Oxygen Analyzer - Manual (Page 40)

IM 12J05D02-01E
5-4 Parameter setting
5-1-3. Setpoint adjustment
NO YES
YES NO
MODE
NO YES
YES
NO
YES
NO YES
NO YES
YES
For adjustments,
follow procedures
as in section 5-2-1.
For adjustments,
follow procedures
as in section 5-2-1.
Setpoint 3 and 4
when enabled in
service codes
42 and 43
Setpoint analogue
control output (mA2)
when enabled in code 31
Note: To enable adjustment of setpoints in
maintenance mode, Service Code 51
must be set to "ON".
Setpoints available will depend on their
configuration in the Service Code.
SETPOINTS
RANGE
SET HOLD
SERVICE
MEASURE
NO MODE YES
ENT
S1
S2
WASH/S3
FAIL/S4
YOKOGAWA
MODE
WASH
CONTACTS
MARKINGS
WITHIN
ENCLOSURE
AIR.CAL
NO
NO
NO
NO
NO