Yokogawa DA100 - Manual (Page 2)

IM DA100-01E 1
Foreword
Thank you for purchasing the YOKOGAWA DA100 Data Acquisition System (DA100/DS400/
DS600).
This User’s Manual contains useful information regarding the instrument’s functions and
operating procedures, as well as precautions that should be observed during use. To ensure proper
use of the instrument, please read this manual thoroughly before operating it.
Keep the manual in a safe place for quick reference whenever a question arises.
The following manuals are provided with the instrument in addition to this manual.
Manual Name Manual No.
DA100 Communication Interface IMDA100-11E
Standard Software for DA100 IMDP10001-62E
Notes
• DARWIN is a system comprising a number of data-acquisition equipment components. In the
course of system growth, new models, software, various input/output modules and optional
features are added to the family to enhance the systems expandability and flexibility. You can
check the versions of your equipment and software by referring to the style number (Sn) and
release number (Rn) respectively which are shown on the nameplate of the main unit.
When configuring a system, you must confirm that the style number of each component unit and
software meets the following requirements:
1 the style number of each input/output module must be the same as or lower than that of the
main unit or subunit to which the module is connected.
2 the release number of a dedicated software package must be the same or higher than the style
number of the main unit or subunit where the package is installed and where it performs
control.
Any equipment/software not meeting these requirements might have incompatible areas with your
system configuration.
In this manual, equipment of style S8 is explained.
• The contents of this manual are subject to change without prior notice as a result of improvements
in the instrument’s performance and functions.
• Every effort has been made in the preparation of this manual to ensure the accuracy of its
contents. However, should you have any questions or find any errors, please contact your nearest
YOKOGAWA representative as listed on the back cover of this manual.
• Copying or reproduction of all or any part of the contents of this manual without YOKOGAWA’s
permission is strictly prohibited.
Trademarks
Microsoft, MS-DOS, Windows, and Windows NT are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
IBM is a registered trademark of International Business Machines Corporation.
Revisions
1st Edition: January 1996
2nd Edition: June 1996
3rd Edition: March 1997
4th Edition: July 1997
5th Edition: November 1997
6th Edition: November 1998
7th Edition: June 2000
8th Edition: October 2000
Disk No. RE02
8th Edition: October 2000 (YK)
All Rights Reserved, Copyright © 1996 Yokogawa Electric Corporation