Yokogawa DA100 - Manual (Page 93)

IM DA100-01E 4-24
4.8 Alarm Output Module
Type, Number of outputs, Contact mode, Terminal type
Contact mode
Transfer contact (NO-C-NC)
Make contact (NO-C)
screw
screw
Terminal type Type
Number of
outputs
DT200-11
DT200-21
4
10
Style Number S1
Normal operating temperature/humidity
0 to 50 °C
20 to 80% RH for 0 to 40
°C, 10 to 50% RH for 40 to 50 °C (no condensation)
Output updating rate
every measurement interval
Contact mode
Make contact : normal open/common contact type
Transfer contact : normal open/common/normal close type
Activate/de-activate
switchable
Hold/non-hold
switchable
Reflash alarm
up to 6 contacts can be specified.
Contact capacity
250V DC/0.1A (with a resistor load)
250V AC/2A (with a resistor load)
30V DC/2A (with a resistor load)
Dielectric strength
Between the output terminal and ground: 2300V AC (50/60Hz) for one minute.
Power consumption
Included in the main unit or the subunit to which the module is to be installed.
External dimensions and weight
Weight(kg)
0.3
0.35
External dimensions(W)x(H)x(D) mm
approx.57 x 137 x 67.9
approx.57 x 137 x 67.9
Type
DT200-11
DT200-21