Yokogawa DA100 - Manual (Page 9)

IM DA100-01E 8
How to Use this Manual
This User’s Manual consists of the following four chapters and an Index.
Chapter Title Description
Chapter 1 System configuration Explains the position of the DA100 system within
DARWIN, its configuration, functions, etc..
Chapter 2 Installation and Wiring Explains how to install and wire the DA100.
Chapter 3 Trouble-shooting and Explains how to analyse troubles and what to
Maintenance do in case trouble occurs.
Chapter 4 Specifications Explains basic output settings such as the output mode,
type, frequency and voltage.
Index Gives the index in alphabetical order.
Conventions Used in this Manual
Units
k ........ means “1000”. Example: 100kHz
K ........ means “1024”. Example: 128Kword
Used Characters
Alphanumerics enclosed in double quotation marks usually refer to characters and set values that
appear on the screen and panel.
Note
The following symbol marks are used to attract the operator’s attention.
Affixed to the DA100/DS400/DS600, indicating that for safety, the
operator should refer to the appropriate User’s Manual. For a list of the
User’s Manuals, refer to page 1.
WARNING
Describes precautions that should be observed to prevent the danger of
injury or death to the user.
CAUTION
Describes precautions that should be observed to prevent damage to the
DA100/DS400/DS600.
Note Provides information that is important for proper operation of the DA100/
DS400/DS600.