AIS Router AI2524 - Manual (Page 118)

AI2524 Router Card User’s Manual
Page 7-18 August 1997
2524UM
Router1# show version
GS Software, Version 9.0(1)
Copyright (c) 1986-1992 by Cisco Systems, Inc.
Compiled Fri 14-Feb-92 12:37
System Bootstrap, Version 4.3
Router1 uptime is 2 days, 10 hours, 0 minute
System restarted by reload
System image file is unknown, booted via tftp from 131.108.13.111
Host configuration file is "thor-boots", booted via tftp from 131.108.13.111
Network configuration file is "network-confg", booted via tftp from 131.108.13.111
CSC3 (68020) processor with 4096K bytes of memory.
X.25 software.
Bridging software.
1 MCI controller (2 Ethernet, 2 Serial).
2 Ethernet/IEEE 802.3 interface.
2 Serial network interface.
32K bytes of non-volatile configuration memory.
Configuration register is 0x0
Router1# configure terminal
Router1(config)# config-register 0xF
^Z
Router1# reload
Specify the Startup Configuration File
Configuration files can be stored on network servers. You can config-
ure the router to automatically request and receive two configuration
files from the network server at startup:
z Network configuration fil
z Host configuration file
The server first attempts to load the network configuration file. This
file contains information shared among several routers. For example,
you can use it to provide mapping between IP addresses and host
names.
The second file the server attempts to load is the host configuration
file, containing commands applicable to one router in particular. Both
the network and host configuration files must reside on a network
server reachable via TFTP and must be readable.
You can specify an ordered list of network configuration and host con-
figuration filenames. The Cisco IOS software scans this list until it
successfully loads the appropriate network or host configuration file.