AIS Router AI2524 - Manual (Page 13)

AI2524 Router Card User’s Manual
August 1997 TOC-9
2524UM
Configure LAPF Parameters..........................................................................13-12
Configure Frame Relay Traffic Shaping.....................................................................13-13
Enable Frame Relay Traffic Shaping on the Interface................................... 13-14
Specify a Traffic-Shaping Map Class for the Interfac ................................. 13-14
Define a Map Class with Queuing and Traffic Shaping Parameters ............. 13-15
Define Access Lists........................................................................................13-15
Define Priority Queue Lists for the Map Class.............................................. 13-15
Define Custom Queue Lists for the Map Class .............................................13-16
Example: Frame Relay Traffic Shaping ........................................................13-16
Customize Frame Relay for Your Network ................................................................13-18
Configure Frame Relay Subinterfaces ...........................................................13-18
Examples: Basic Subinterface........................................................................13-21
Example: Frame Relay Multipoint Subinterface with Dynamic Addressing 13-22
Example: IPX Routes over Frame Relay Subinterfaces ................................ 13-24
Example: Unnumbered IP over a Point-to-Point Subinterface ...................... 13-25
Example: Transparent Bridging Using Subinterfaces ....................................13-27
Configure Frame Relay Switching.................................................................13-28
Example: PVC Switching Configuration....................................................... 13-30
Example: Pure Frame Relay DCE .................................................................13-31
Example: Hybrid DTE/DCE PVC Switching ................................................ 13-34
Example: Switching over an IP Tunnel ......................................................... 13-36
Disable or Reenable Frame Relay Inverse ARP ............................................ 13-38
Create a Broadcast Queue for an Interface .................................................... 13-38
Configure Payload Compression ...................................................................13-39
Configure TCP/IP Header Compression ........................................................13-39
Example: IP Map with Inherited TCP/IP Header Compression .................... 13-42
Example: Using an IP Map to Override TCP/IP Header Compression ......... 13-42
Example: Disabling Inherited TCP/IP Header Compression......................... 13-43
Example: Disabling Explicit TCP/IP Header Compression .......................... 13-44
Configure Discard Eligibility.........................................................................13-45
Configure DLCI Priority Levels ....................................................................13-45
Monitor the Frame Relay Connections .......................................................................13-47
Example: Configuration Providing Backward Compatibility ........................ 13-47
Example: Booting from a Network Server over Frame Relay....................... 13-48
Chapter 14: T1 Interface Configuration Steps .......................................................14-1
Introduction .................................................................................................................14-1
Configure Fractional T1 ..............................................................................................14-1
Configuration Overview ................................................................................14-1
Specify the Clock Source...............................................................................14-1
Enable Data Inversion Before Transmission ................................................. 14-1
Specify the Frame Type of a FT/T1 Line ......................................................14-2
Specify the CSU Line Build Out ...................................................................14-2
Specify FT1/T1 Line-Code Type...................................................................14-3
Enable Remote Alarms ..................................................................................14-3
Enable Loopcodes that Initiate Remote Loopbacks....................................... 14-4
Specify Timeslots...........................................................................................14-5