AIS Router AI2524 User Manual
Page 129
Chapter 7: Manually Loading System Images
August 1997
Page 7-29
2524UM
Configure the Router to Automatically Boot from Flash Memory
To configure the router to boot automatically from Flash memory, per-
form one of these tasks in global configuration mode:
z
Boot the first bootable file found in any partition.
boot system {flash | flash flash:}
z
Boot the first bootable file from the specified partition.
boot system {flash | flash flash:}
partition-number:
z
Boot the specified file from the first partition.
boot system {flash | flash flash:}
filename
z
Boot the specified file from the specified partition.
boot system {flash | flash flash:}
partition-number:filename
The result of booting a relocatable image from Flash memory depends
on where and how the image was downloaded into Flash memory.
Configure a Flash Partition as a TFTP Serve
To configure a Flash partition as a TFTP server, perform one of these
tasks in global configuration mode:
z
Specify a file.
tftp-server flash
filename
z
Specify a file in the first partition of Flash.
tftp-server flash
filename
z
Specify a file in the specified partition of Flash.
tftp-server flash
partition-number:
filename
Once you have specified TFTP server operation, exit configuration
mode and save the configuration information to your startup configu-
ration.
Use Flash Load Helper to Upgrade Software on Run-from-
Flash Systems
Flash load helper is a software option that enables you to upgrade sys-
tem software on run-from-Flash systems that have a single bank of