AIS Router AI2524 - Manual (Page 384)

AI2524 Router Card User’s Manual
Page 16-8 August 1997
2524UM
4. When the System Configuration Dialog asks whether you want to
view the current interface summary, press< Return> or enter yes:
First, would you like to see the current interface summary? [yes]:
Any interface listed with OK? value “NO" does not have a valid configuration
Interface IP-Address OK? Method Status Protocol
EthernetO unassigned NO not set up down
BRIO unassigned NO not set up up
SerialO unassigned NO not set down down
Seriall unassigned NO not set down down
5. Configure the global parameters. Choose which protocols to sup
port on the Ethernet interface. For IP installations, you can press
<Enter> to accept the default values (in brackets) for most of the
questions. A typical configuration is:
Configuring global parameters:
Enter host name {Router
Next, you are prompted to enter an enable secret password. There are
two types of privileged-level passwords:
Enable secret password (a very secure, encrypted password
Enable password (a less secure, nonencrypted password)
The enable password is used when the enable secret password does not
exist.
For maximum security, be sure the passwords are different. If you
enter the same password for both, the router will accept your entry, but
will display a warning message indicating that you should enter a dif-
ferent password.
6. Enter an enable secret password:
The enable secret is a one-way cryptographic secret used instead
of the enable password when it exists.
Enter enable secret: pail
The enable password is user when there is no enable secret and
when using older software and some boot images.