Examples: tarp configuration, Examples: tarp configuration -65 – AIS Router AI2524 User Manual
Page 223
Chapter 9: AI2524 OSI/CLNP Configuration Steps
August 1997
Page 9-65
2524UM
z
List all adjacencies that are blacklisted (that is, adjacencies that
will not receive propagated TARP PDUs).
show tarp blacklisted-adjacencies
z
Display information about a specific TARP router stored in the lo-
cal TID cache.
show tarp host
tid
z
List all interfaces on the router that have TARP enabled.
show tarp interface [
type number
]
z
Display the contents of the loop detection buffer table.
show tarp ldb
z
List all the static entries in the TID cache.
show tarp map
z
List all static TARP adjacencies.
show tarp static-adjacencies
z
Display information about the entries in the TID cache.
show tarp tid-cache
z
Display statistics about TARP PDUs.
show tarp traffic
Examples: TARP Configuration
This section provides both basic and complex examples of TARP con-
figuration.
Basic TARP Configuration Example
This example enables TARP on the router and interface Ethernet 0.
The router is assigned the TID myname.
clns routing
tarp run
tarp tid myname
interface ethernet 0
tarp enable