AIS Router AI2524 - Manual (Page 331)

Chapter 13: AI2524 Frame Relay Configuration Steps
August 1997 Page 13-15
2524UM
Define a Map Class with Queuing and Traffic Shaping
Parameters
When you define a map class for Frame Relay, you can define the av-
erage and peak rates (in bits per second) allowed on virtual circuits as-
sociated with the map class. You can also specify either a custom
queue-list or a priority queue-group to use on virtual circuits associ-
ated with the map class (optional).
Beginning in global configuration mode, define a map class:
1. Specify a map class to define.
map-class frame-relay map-class-name
2. Define the traffic rate for the map class.
frame-relay traffic-rate average [ peak ]
3. Specify a custom queue-list.
frame-relay custom-queue-list number
4. Specify a priority queue-list.
frame-relay priority-group number
Define Access Lists
You can specify access lists and associate them with the custom
queue-list defined for any map class. The list number specified in th
access list and the custom queue list tie them together.
See the appropriate protocol chapters for information about defining
access lists for the protocols you want to transmit on the Frame Relay
network.
Define Priority Queue Lists for the Map Class
You can define a priority list for a protocol and a default priority list.
The number used for a specific priority list ties the list to the Frame
Relay priority group defined for a specified map class.
For example, if you enter th frame relay priority-group
2 command for the map class fast_vcs and then you enter th prior-
ity-list 2 protocol decnet high command, that priority
list is used for the fast_vcs map class. The average and peak traffic
rates defined for the fast_vcs map class are used for traffic.