Router configuration mode, Router configuration mode -15, Chapter 4: understanding the user interface – AIS Router AI2524 User Manual

Page 51

Advertising
background image

Chapter 4: Understanding the User Interface

August 1997

Page 4-15

2524UM

Router(config)# interface serial 2

Router(config-if)# encapsulation frame-relay

Router(config-if)# interface serial 2.1

Router(config-subif)# ?

Interface configuration commands:

apollo

Apollo interface subcommands

appletalk

Appletalk interface subcommands

bandwidth

Set bandwidth informational parameter

bridge-group

Transparent bridging interface parameters

clns

CLNS interface subcommands

decnet

Interface DECnet config commands

delay

Specify interface throughput delay

description Interface

specific description

exit

Exit from interface configuration mode

frame-relay Set

frame

relay parameters

ip

Interface Internet Protocol config commands

ipx

Novell interface subcommands

isis

IS-IS commands

iso-igrp

ISO-IGRP interface subcommands

no

Negate a command or set its defaults

ntp

Configure NTP

shutdown

Shutdown the selected interface

Router Configuration Mode

Router configuration commands configure an IP routing protocol.

Router(config)# router ?

bgp

Border Gateway Protocol (BGP)

egp

Exterior Gateway Protocol (EGP)

igrp

Interior Gateway Routing Protocol (IGRP)

isis

ISO IS-IS iso-igrp IGRP for OSI networks

ospf

Open Shortest Path First (OSPF)

rip

Routing Information Protocol (RIP)

static Static

CLNS

Routing

Advertising