AIS Router AI2524 - Manual (Page 226)

AI2524 Router Card User’s Manual
Page 10-2 August 1997
2524UM
3. Configure the second synchronous serial interface, for example:
Configuring interface Serial 1:
Is this interface in use? [yes]:
Configure IP on this interface? [yes]:
Configure IP unnumbered on this interface? [no]:
IP address for this interface: 172.16.74.2
Number of bits in subnet field [8]:
Class B network is 172.16.0.0, 8 subnet bits; mask is
255.255.255.0
Configure AppleTalk on this interface? [no]: yes
AppleTalk starting cable range [3]: 5
AppleTalk ending cable range [4]: 5
AppleTalk zone name [myzone]: ZZ Serial
AppleTalk additional zone name:
Configure IPX on this interface? [no]: yes
IPX network number [3]: B003
4. The configuration you entered now displays and you are asked if
you want to use the displayed configuration. If you enter no, you
will lose the configuration information you just entered and you
can begin the configuration again. If you type yes, the configura-
tion will be entered and saved in the startup configuration:
Use this configuration? [yes/no]: yes
Building configuration...
Use the enabled mode 'configure' command to modify this configuration.
Press RETURN to get started!