Manually boot from a network file, Manually boot from a network file -36 – AIS Router AI2524 User Manual
Page 136
AI2524 Router Card User’s Manual
Page 7-36
August 1997
2524UM
In this example, a router is manually booted from Flash memory. Be-
cause the optional filename argument is absent, the first file in Flash
memory is loaded.
> boot flash
F3: 1858656+45204+166896 at 0x1000
Booting gs7-k from flash memory RRRRRRRRRRRRRRRRRR
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR [OK - 1903912/13765276 bytes]
F3: 1858676+45204+166896 at 0x1000
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions as
set forth in subparagraph (c) of the Commercial Computer Software - Restricted
In this example, the boot flash command is used with the filename gs7-
k; the name of the file that is loaded:
> boot flash gs7-k
F3: 1858656+45204+166896 at 0x1000
Booting gs7-k from flash memory
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR [OK - 1903912/13765276 bytes]
F3: 1858676+45204+166896 at 0x1000
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions as
set forth in subparagraph (c) of the Commercial Computer Software - Restricted
System Bootstrap, Version 4.6(1012) [mlw 99], INTERIM SOFTWARE Copyright (c) 1986-
1992 by cisco Systems RP1 processor with 16384 Kbytes of memory
Manually Boot from a Network File
To manually boot from a network file, complete these tasks in EXEC
mode:
1.
Restart the router
reload
2.
Press <Break> during the first 60 seconds of system startup.