AIS Router AI2524 - Manual (Page 285)

Chapter 12: AI2524 X.25 Configuration Steps
August 1997 Page 12-27
2524UM
z Allow reverse charging acceptance.
x25 accept-reverse
or
x25 map protocol address [ protocol2
address2 [...[ protocol9 address9 ]]] x121-
address accept-reverse
z Select throughput class negotiation.
x25 facility throughput in out
or
x25 map protocol address [ protocol2
address2 [...[ protocol9 address9 ]]] x121-
address throughput in out
z Select transit delay.
x25 facility transit-delay value
or
x25 map protocol address [ protocol2
address2 [...[ protocol9 address9 ]]] x121-
address transit-delay milliseconds
z Set the Recognized Private Operation Agency (RPOA) to use.
x25 facility rpoa name
or
x25 map protocol address [ protocol2
address2 [...[ protocol9 address9 ]]] x121-
address rpoa name
z Set the AI2524 standard network user identification.
x25 map protocol address [ protocol2
address2 [...[ protocol9 address9 ]]] x121-
address nuid username password
z Set a user-defined network user identification allowing the format
to be determined by your network administrator.
x25 map protocol address [ protocol2
address2 [...[ protocol9 address9 ]]] x121-
address nudata string
The windowsize and packetsize options are supported for
PVCs, although they have a slightly different meaning because PVCs
do not use the call setup procedure. If the PVC does not use the inter-