AIS Router AI2524 - Manual (Page 342)

AI2524 Router Card User’s Manual
Page 13-26 August 1997
2524UM
Configuration for Router B
frame-relay switching
!
interface token-ring 0
ip address 131.108.178.1 255.255.255.0
!
interface serial 0
no ip address
encapsulation frame-relay IETF
bandwidth 384
clockrate 4000000
frame-relay intf-type dce
!
interface serial 0.2 point-to-point
ip unnumbered TokenRing1
ip pim sparse-mode
bandwidth 384
frame-relay interface-dlci 20
Point-to-Multipoint Interfaces
In interface configuration mode, configure transparent bridging for
point-to-multipoint subinterfaces:
1. Specify a serial interface.
interface serial number
2. Configure Frame Relay encapsulation on the serial interface.
encapsulation frame-relay
3. Specify a subinterface.
interface serial number.subinterface-number
multipoint
4. Define the mapping between a next hop protocol address and the
DLCI used to connect to the address.
frame-relay map bridge dlci [broadcast]
[ietf]
5. Associate the subinterface with a bridge group.
bridge-group bridge-group