AIS Router AI2524 - Manual (Page 16)

AI2524 Router Card User’s Manual
Page 1-2 August 1997
2524UM
Chapter 8 AI2524 Protocol Configuration Steps
This chapter describes how to configure th
AI2524 for OSPF TCP/IP, IGRP TCP/IP, and
RIP TCP/IP.
Chapter 9 AI2524 OSI/CLNP Configuration Steps
This chapter describes how to configure th
AI2524 for ISO IGRP dynamic routing, IS-IS
dynamic routing, and CLNS static routing.
Chapter 10 Serial Interface Configuration Steps
This chapter describes how to configure syn-
chronous serial interfaces.
Chapter 11 AI2524 Sync PPP Configuration Steps
This chapter describes how to enable PPP en-
capsulation and perform a variety of PPP
configuration tasks.
Chapter 12 AI2524 X.25 Configuration Steps
This chapter describes how to configure th
X.25 interface, and includes datagram trans-
port, routing, and X.29 access lists and profile
scripts.
Chapter 13 AI2524 Frame Relay Configuration Steps
This chapter describes how to enable frame
relay encapsulation and perform a variety of
Frame Relay configuration tasks.
Chapter 14 T1 Interface Configuration Steps
This chapter describes how to configure th
AI2524 for fractional T1.
Chapter 15 56/64-kbps Switched and Digital Data Ser-
vices (DDS) Interface Configuration Steps
This chapter describes how to configure
switched and DDS interfaces.
Chapter 16 Basic Configuration
This chapter describes the AI2524’s panel,
cable connections, and firmware.
Chapter 17 Command References
This chapter contains a link to the AI2524/
Cisco IOS v. 11.2 documentation CD.