AIS Router AI2524 - Manual (Page 196)

AI2524 Router Card User’s Manual
Page 9-38 August 1997
2524UM
6. Set the interface up as a DTE with X.25 encapsulation:
interface serial 0
encapsulation x25
x25 address 1111
x25 nvc 4
7. Specify iso-igrp routing using the specified tag sales:
clns router iso-igrp sales
8. Define a static mapping between Detroit's nsap and its X.121 ad-
dress:
x25 map clns 2222 broadcast
This configuration brings up an X.25 virtual circuit between the router
in Chicago and the router in Detroit. Routing updates will be sent
across this link. This implies that the virtual circuit could be up contin-
uously.
If the Chicago office should grow to contain multiple routers, it would
be appropriate for each of those routers to know how to get to Detroit.
Add the following command to redistribute information between rout-
ers in Chicago:
router iso-igrp sales
redistribute static
Example: Static InterdomainRo uting
Figure 9-11 and the example configurations illustrate how to configure
two routers that distribute information across domains. In this exam-
ple, Router A (in dom ainOrion) and Router B (i n domainPleiades)
communicate across a serial link.