AIS Router AI2524 - Manual (Page 211)

Chapter 9: AI2524 OSI/CLNP Configuration Steps
August 1997 Page 9-53
2524UM
Router B
router iso-igrp test-proc
net 49.0001.bbbb.bbbb.bbbb.00
!
interface serial 2
clns router iso-igrp test-proc
1. Configure this side as a DCE:
encapsulation x25-dce
2. Define the X.121 address of 31102 for serial 2:
X25 address 31102
3. Configure the NSAP of Router A and accept reverse charges:
x25 map clns 31101 broadcast accept-reverse
Enhance ISO
CLNS
Performance
Generally, you do not need to change the router's default settings for
CLNS packet switching, but there are some modifications you can
make when you decide to make changes in your network's perfor
mance. The following sections describe ISO CLNS parameters that
you can change:
z Specify the MTU Size
z Disable Checksums
z Disable Fast Switching Through the Cache
z Set the Congestion Threshold
z Transmit Error Protocol Data Units (ERPDUs)
z Control Redirect Protocol Data Units (RDPDUs)
z Configure Parameters for Locally Sourced Packets