HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 108)

108 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
3. Click NTP Servers in the left menu to display the Setup: Date & Time - NTP
Servers page.
Figure 2-46. Setup: Date & Time - NTP Servers Page
4. Under Add New NTP Server, type the IP address for the NTP server in the Server
IP text box.
5. Select the NTP protocol version number from the Version drop-down list.
6. Select the mode, either True or False from the Enabled drop-down list. The True
value enables synchronization. The False value disables synchronization.
7. Click Add Server to apply the settings to the running configuration.
8. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
TIP: To remove an NTP server, click the check box next to the name and click Remove
Selected Servers. This action applies the settings to the running configuration. Click Save to
write your settings to memory or click Reset to return the settings to their previous values.
TIP: To disable synchronization for a server, click the check box next to the NTP server name
and click Disable. To enable synchronization for a server, click the check box next to the NTP
server name and click Enable.