HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 87)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 87
2 -
C
ON
FIG
URING
TH
E
HP
EF
S
WA
N
A
C
C
EL
ER
ATO
R
6. Enter the domain administrator login, and password in the Domain Admin Login
and Domain Admin Password text boxes.
7. Click Update Settings. You are notified if the HP EFS WAN Accelerator
successfully joined the domain.
8. Under Security Signature Settings, select Enabled, Disabled, or Required from
the Security Signature drop-down list and click Update Security Signature
Settings.
9. Under Idle Connection Timeout, type a timeout value in minutes in the + text box
and click Update the Connection Timeout.
10. Under Local Administrator Settings, type the local administrator password in the
Local Admin Password text box. You must use the correct syntax for the
administrator login name (for example: admin_user@parent_realm) even if you
belong to a subdomain.
11. Retype the local administrator password in the Confirm text box and click Update
Administrator Settings.
12. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
13. Navigate to the Setup: Start/Stop Service page.
14. Under Optimization, click Restart Service to restart the HP EFS WAN
Accelerator service.
15. Under PFS, click Start Service to start PFS.
TIP: Select Automatic, or Manual from the Startup drop-down list in the Setup: Start/Stop
Services page to specify whether you want the service to start automatically with start-up or
manually each time you use PFS.
16. Navigate to the Setup: Configuration Manager page and save your changes to
memory.
Disabled Specifies the default value. If the client has security signatures set to
disabled, PFS will not function. This setting assumes that clients are
not using security signatures.
Enabled Specifies that SMB signing on the client is set to enabled. If the client
has security signatures enabled, it is supported. If not, PFS continues
to function in any case.
Required Specifies SMB signing on the client is set to required. PFS only
functions if clients have security signatures enabled. If they do not,
PFS will not function.