HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 36)

36 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
6. Type the IP address, port, or port label in the Destination Subnet and Port text
boxes. To specify all ports, type all in the Port text box.
7. Optionally, under Advanced Options, select the VLAN identification number from
the VLAN Tag ID drop-down list box. All specifies the rule applies to all VLANs;
Untagged specifies the rule applies to non-tagged connections.
8. Click Add Rule to apply the rule to the running configuration.
9. Optionally, under Additional Options, click Enable Computation of Neural
Heuristics to enable the HP EFS WAN Accelerator to select the optimal packet
framing boundaries for SDR.
10. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
TIP: To remove a rule, click the check box next to the name and click Remove Selected Rules.
This action applies the settings to the running configuration. Click Save to write your settings to
memory or click Reset to return the settings to their previous values.
To deny in-path
connections 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click In-Path Rules in the left menu to display the Setup: Optimization Service -
In-Path Rules page.