HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 53)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 53
2 -
C
ON
FIG
URING
TH
E
HP
EF
S
WA
N
A
C
C
EL
ER
ATO
R
To set an auxiliary
interface 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Host Settings in the left menu to display the Setup: Host Settings - Interface:
Primary page.
3. Click Interface: AUX in the left menu to display the Setup: Host Settings -
Interface: AUX page.
Figure 2-15. Setup: Host Settings - Interface: AUX Page
4. Select Enabled or Disabled from the AUX Interface drop-down menu.
5. Optionally, under IP Address, choose the method for obtaining the auxiliary
interface IP address:
‹ Click Obtain IP Address Automatically to have the HP EFS WAN
Accelerator automatically find the IP address for the interface. (A DHCP
server must be available so that the HP EFS WAN Accelerator can request the
IP address from it.)
‹ Click Specify IP Address Manually to assign a specific device as the
interface:
‹ Type the IP address in the IP Address text box.
‹ Type the subnet mask in the Subnet Mask text box.
6. Under Additional Interface Settings, select the speed in the Speed drop-down list
to set the speed for the auxiliary interface. The default value is Auto.
7. Select Auto, Full or Half in the Duplex drop-down list to set the duplex speed for
the auxiliary interface. The default value is Auto.