Setting advanced network parameters – HP StorageWorks Enterprise File Services WAN Accelerator User Manual
Page 60
60
2 - C
ONFIGURING
THE
HP EFS WAN A
CCELERATOR
To enable proxies
1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Host Settings in the left menu to display the Setup: Host Settings - Primary
page.
3. Click Proxies in the left menu to display the Setup: Host Settings - Proxies page.
Figure 2-21. Setup: Host Settings - Proxies Page
4. Type the Web or FTP IP address in the Web/FTP Proxy IP Address text box.
5. Type the port in the Port text box.
6. Click Apply to apply your settings to the running configuration.
7. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Setting Advanced Network Parameters
The following section describes how to set advanced network parameters in the HP
EFS WAN Accelerator. It contains the following sections:
“Setting Connection Forwarding,”
next
“Setting Authentication and Encryption” on page 63
“Enabling Failover and Synchronized Data Store” on page 66