HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 114)

114 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
11. Under Global Settings, type the server key in the Server Key text box.
12. Type the time-out period in the Time-out text box.
13. Type the number of time you want to allow the user to retry authentication in the
Retries text box.
14. Click Update Settings to update your global RADIUS settings.
15. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
TIP: To remove a server, click the check box next to the name and click Remove Selected
Servers. This action applies the settings to the running configuration. Click Save to write your
settings to memory or click Reset to return the settings to their previous values.
TIP: To disable authentication for a server, click the check box next to the server name and click
Disable. To enable authentication for a server, click the check box next to the server name and
click Enable.
Setting
TACACS+
Servers
Optionally, you can configure TACACS+ server authentication in the Setup:
Authentication - TACACS+ Servers page. TACACS+ is an authentication protocol
that allows a remote access server to forward a login password for a user to an
authentication server to determine whether access is allowed to a given system.
For detailed information about configuring RADIUS and TACACS+ servers to accept
login requests from the HP EFS WAN Accelerator, see the HP StorageWorks
Enterprise File Services WAN Accelerator Deployment Guide.
To set a TACACS+
server 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Authentication in the left menu to display the Setup: Authentication -
General Settings page.