HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 111)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 111
2 -
C
ON
FIG
URING
TH
E
HP
EF
S
WA
N
A
C
C
EL
ER
ATO
R
Setting the
Administrative
Password
During the initial setup of the HP EFS WAN Accelerator you set the administrator
password. Check or modify your setting in the Setup: Authentication - Account:
Admin page. (The default administrator password is password.)
The administrator user has full privileges in the HP EFS WAN Accelerator. For
example, as an administrator you can set and modify configuration settings, restart the
HP EFS WAN Accelerator service, reboot the HP EFS WAN Accelerator, and create
and view performance and system reports. The password must have a minimum of 6
characters.
To set the
administrator
password 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Authentication in the left menu to display the Setup: Authentication -
General Settings page.
3. Click Account: Admin in the left menu to display the Setup: Authentication -
Account: Admin page.
Figure 2-48. Setup: Authentication - Account: Admin Page
4. Under Change Password, type the new administrative password in the New
Password text box. The password must have a minimum of 6 characters.
5. Retype the new administrative password in the Confirm New Password text box.
6. Click Change Password to apply your settings to the running configuration.
7. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.