HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 78)

78 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
To edit a WCCP
service group settings 1. Click the service group ID in the Groups list to display the Setup: Advanced
Networking - WCCP Service Group: <group ID> page.
Figure 2-30. Setup: Advanced Networking - WCCP Service Group: <group ID> Page
2. Optionally, under Group Settings, highlight and delete the old password in the
Password and Confirm Password text boxes.
3. Type a new service group password in the Password and Confirm Password text
boxes. The password is limited to 8 characters.
4. Optionally, modify the priority number in the Priority text box to assign a priority
to the service group. The default value is 200. The range is 0-255.
5. Optionally, modify the weight in the Weight text box to assign a redirection weight
to the HP EFS WAN Accelerator. The range is 0-65535.