HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 110)

110 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
For detailed information about configuring RADIUS and TACACS+ servers to accept
login requests from the HP EFS WAN Accelerator, see the HP StorageWorks
Enterprise File Services WAN Accelerator Deployment Guide.
To set an
authentication method 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Authentication in the left menu to display the Setup: Authentication -
General Settings page.
Figure 2-47. Setup: Authentication - General Settings Page
3. Under Authentication Methods, select Local, RADIUS, or TACACS+ from the
Method 1 drop-down list. Make sure you put the authentication methods in the
order in which you want them to occur. If authorization fails on the first method,
the next method is attempted, and so forth, until all the methods have been
attempted.
4. Select None, Local, RADIUS, or TACACS+ from the Method 2 drop-down list.
5. Select None, Local, RADIUS, or TACACS+ from the Method 3 drop-down list.
6. Optionally, under Advanced Authorization, select Remote First, Remote Only, or
Local Only from the Authorization Policy drop-down list.
7. Optionally, select Admin or Monitor from the Default User drop-down list.
8. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before committing it to memory.)
9. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.