HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 113)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 113
2 -
C
ON
FIG
URING
TH
E
HP
EF
S
WA
N
A
C
C
EL
ER
ATO
R
For detailed information about configuring RADIUS and TACACS+ servers to accept
login requests from the HP EFS WAN Accelerator, see the HP StorageWorks
Enterprise File Services WAN Accelerator Deployment Guide.
To set RADIUS server
authentication 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Authentication in the left menu to display the Setup: Authentication -
General Settings page.
3. Click RADIUS Servers in the left menu to display the Setup: Authentication -
RADIUS Servers page.
Figure 2-50. Setup: Authentication - RADIUS Servers Page
4. Under Add New RADIUS Server, type the RADIUS server IP address in the
Server IP text box.
5. Type the port for the RADIUS server in the Authentication Port text box.
6. Type the server key in the Server Key text box.
7. Type the time-out period in the Time-out text box.
8. Type the number of time you want to allow the user to retry authentication in the
Retries text box.
9. Select True or False from the Enabled drop-down list to enable or disable the
server.
10. Click Add Server to apply your settings to the running configuration.