HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 59)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 59
2 -
C
ON
FIG
URING
TH
E
HP
EF
S
WA
N
A
C
C
EL
ER
ATO
R
3. Click Hosts in the left menu to display the Setup: Host Settings - Hosts page.
Figure 2-20. Setup: Host Settings - Hosts Page
4. Under Add New Host, type the IP address for the new host in the Host IP text box.
5. Type the host name for the new host in the Host Name text box.
6. Click Add Entry to apply your settings to the running configuration.
7. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
TIP: To remove a host, select the host and click Remove Selected Entries. This action applies
the settings to the running configuration. Click Save to write your settings to memory or click
Reset to return the settings to their previous values.
Setting Proxies
Optionally, you can set Web and FTP proxies in the Setup: Host Settings - Proxies
page. This sets the proxy that is used when a Uniform Resource Locator (URL) is
specified in the Management Console or the CLI. For example, this proxy setting is
used in the Setup: Software Upgrade page if you specify a URL from which to
download the software image. This proxy applies only if you use the ftp:// or http://
protocols in the URL.