HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 130)

130 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
Shutting Down
the HP EFS
WAN
Accelerator
You can shutdown the HP EFS WAN Accelerator in the Setup: Shutdown Appliance
page. When you shutdown the HP EFS WAN Accelerator, connections are broken and
optimization ceases. Shutdown can take a few minutes.
To restart the system you must manually turn on the HP EFS WAN Accelerator.
To shutdown the HP
EFS WAN Accelerator 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Shutdown Appliance in the left menu to display the Setup: Shutdown
Appliance page.
Figure 2-64. Setup: Shutdown Appliance Page
3. Click Shutdown Appliance. After you click Shutdown Appliance, the system is
turned off. To restart the system you must manually turn on the HP EFS WAN
Accelerator.
NOTE: The HP EFS WAN Accelerator does not support the Cisco InterSwitch Link (ISL)
protocol.